Anyone in the Dallas club available to help me get the head off my engine. I've removed the head nuts, the two front long studs, and have tried to get the head off using screwdrivers, steel splitting wedges and it won't budge at all. I soaked the head studs with PB Blaster penetrant and it has soaked all the way to the block, but the head won't move at all.

I've never had this problem in the past. I could sure use some help.

thanks,

Todd
817-303-3511

Follow Ups:

• Smoking Ammeter KIve Kerr, Pauls Valley, OK 20:34:31 01/01/08 (1)
  • Re: Smoking Ammeter Bill H, Irving 23:05:40 01/01/08 (0)

Post a Followup