In Reply to: front and rear end quesitons posted by bennie adams on January 02, 2008 at 22:28:39:
You might check to see if you can find thickness of original shims and compare with the repros to get an idea of how many you might need. I woul think that the engine wt would alos be a factor. You might have to do that after engine installed. Just be sure all other steering is rebuild or in good cond. Do not forgrt the ball on wishbone at bell housing to be built up with brass and ground back close to round. Chk size based on new parts that fit around it. We are having a rear end rebuilding seminar at the 2008 convention in June in Addison TX. Chk current issues of MAFCA and MARC Magazines and DMAFC homepage. I will ck on someone that reblds rear ends. we have a couple of people in our club that have done several that might could do it. I will get back to you on it.